cub-cadet LT1018

16-30 oilpull · May 11, 2020

I have a LT1018 that won't keep running if I run it on a bank. Won't run after either unless I take carb apart. OK then until I use on bank again. Is there something that can be done to carb to correct? Thanks!

ztrmowers · May 12, 2020

when it dies are you short on fuel or are you losing spark. had unit that would only act up on steep hill. it was wiring issues rubbing frame when unit was leaning over.are you getting fuel out of tank when on hill seen that be problem also.

16-30 oilpull · May 13, 2020

sorry I got busy and didn't check back. don't think it's electrical as it persist after getting off bank. thought perhaps these units had some quirky thing in carb. thanks for your ideas.

ztrmowers · May 15, 2020

have seen it couple times when on enough hill the float would rub on bowl, was rare but did see it happen

cub-cadet LT1018

16-30 oilpull

Member

ztrmowers

Member

16-30 oilpull

Member

ztrmowers

Member

Similar threads