John Deere 260 mower rear bagger mounting bracket

Hey guys! I build alot of 100 series mowers (86-90) and know them pretty well. I set them up with baggers. I recently picked up some 260s and want to set one up with a 46" deck, powerflo and bagger. I have everything except the bagger bracket that mounts on the tractor. I cant find a pic to even figure out what im looking for. I have plenty of 100 series brackets but the 200's are different,... or are they? Anyone have a pic, part # or link? Thanks! B
 
Thanks for the link! I think this is what I m looking for? Hard to see on my little phone,...
mvphoto50772.png
 
The bracket you want is the one in your picture. It would fit the 200 and 300 series of that era. Meaning 240, 260 245, 265, 275, 325 335, 345, maybe the 320 but not sure on that. That bracket snaps over the rear tractor frame right under the fuel tank. No bolts or any other attaching point needed. The spring loaded pin snaps in a hole in the frame to hold the bracket on.
 
(quoted from post at 23:06:45 03/13/20) The bracket you want is the one in your picture. It would fit the 200 and 300 series of that era. Meaning 240, 260 245, 265, 275, 325 335, 345, maybe the 320 but not sure on that. That bracket snaps over the rear tractor frame right under the fuel tank. No bolts or any other attaching point needed. The spring loaded pin snaps in a hole in the frame to hold the bracket on.

Excellent!! Thank you very much!
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top