Drive belt number for Noma Murray mower rider

I need a drive belt number for a E4314000 Kgro power pro rider tractor. I know it was made by Murray and is now owned by Briggs, and parts are hard to find. Anyone have an idea on a belt number or source. This is drive belt to the tranny.thanks.
 
If it was made by Noma, I know that some of the Noma parts books were never put on the computer.

If you have a friendly Briggs dealer in the area, you may be able to get him to call his supplier and get their rep. to look at the Microfiche for that unit, if it still exists. Probably the belt would be among the last thing to become unavailable.
 
If you have enough good belt to fill the sheaves run a tape around it get a measurement, then go to a farm supply store and get one. They're just a generic belt, not a tough application. We order belts online for our mowers, Kevlar for the deck, last longer than OEM. The online suppliers have charts that compare od measurements to belt size, so you can figure out what you need.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top