ed will

Well-known Member
Hi AZ! Does anyone know the size of the drive belt
For the 26 hp craftsman or Poulan 54" cut. I don't want to take it out and then can't get it for a few days
Leaving me without my tractor for that period, this belt turns the fan on top of the torque unit. Thanks. ed will
 
Ed if you provide the Model # Sears Craftsman can match the belt. I have been very satisfied with their service. Prices seem about right. Their #is 800 659 5917.
 
AYP most likely built they mower.

Most of AYP tractors with a 54" deck use the same size belt no matter what the engine make or HP rating may be.

On my Husqvarna 2754. I use one model of a Case IH corn header belt. Which are 5/8" x??"

I know they call for a 1/2" wide belt. But the 5/8" header belt fits the pulleys fine and they seem to last forever. The last one I bought was over seven years ago and it's still going strong.

I will need to double check the length. I am thinking 105". But would rather make sure.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top