CASE 222

Dakota Wilson · Apr 2, 2019

so my case 222 wont start. I just bought a new carb for it because it needed replaced after i replaced it i notice i wasn't getting any spark thought maybe the plug wire was bad so i went and got a new plug wire, still no spark so i went ahead and bought a new coil now i got spark but i still cant get the thing to start. Any suggestions on what it could be??

Bob · Apr 2, 2019

Try a new sparkplug.

Dakota Wilson · Apr 2, 2019

Thanks Bob! i actually tried that just a little it ago and noticed i had spark but very little i haven't replaced the points on the engine yet could that be causing very little spark at the plug?

kencombs · Apr 2, 2019

First thing I'd try, clean and gap the points and change the condenser. Preferably use a known good used condenser to test. Too many bad out of the box new ones any more, but that may be you only choice if you don't have a spare.

CASE 222

Dakota Wilson

Member

Bob

Well-known Member

Dakota Wilson

Member

kencombs

Well-known Member

Similar threads