farnerjohninpa
New User
my 212 has developed a vibration in the drive system that from exsperiance feels like a belt wiping or one that in slipping,,last spring i had the 2 drive belts replaced and it acted different but not enough to concern me ,,but yesterday it was hard to move the var handle and the handle would go all the way forward and no change in speed a few times it was so hard to move the handle that it would snap very loudly as if the handle had a built in safety clutch
.when it snaps the handl clicks forward about3/8 of an inch and no speed change noted if i need to work on it can the variator be removed as one piece ?since my stroke 5 yrs ago i have about 30 % loss of the left arm, i hope it is not like working inside a dead mules butt if ya can seemy limitation thanks all for your knowledge and time,john
.when it snaps the handl clicks forward about3/8 of an inch and no speed change noted if i need to work on it can the variator be removed as one piece ?since my stroke 5 yrs ago i have about 30 % loss of the left arm, i hope it is not like working inside a dead mules butt if ya can seemy limitation thanks all for your knowledge and time,john