Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Fordson Tractors Discussion Forum

Early Fordson tractors

Welcome Guest, Log in or Register
Author  [Modern View]

09-19-2022 18:19:55

Report to Moderator

With this talk on the early Fordson tractors got me to wondering how many of you have seen X9, the expermintal the Ford muesuem got rid of years ago> Or the ones made before the name was cast inti the radiator. I think it was 1917. A friend owns both the X9 and a smooth casting radiater one. He probably has 2 dozen restored condition Fordsons including a couple of craulars plus a couple of dozen parts type setting in his field plus his large barn filled with just parts.

[Log in to Reply]   [No Email]

09-20-2022 05:56:47

Report to Moderator
 Re: Early Fordson tractors in reply to Leroy, 09-19-2022 18:19:55  
I Havent seen in the rust (yet), but I did read about it in the Jan/Feb. 2022 issue of Antique Power.
Third Party Image

[Log in to Reply]  [No Email]

09-21-2022 03:55:11

Report to Moderator
 Re: Early Fordson tractors in reply to warbaby, 09-20-2022 05:56:47  
Excellent article , tells the story of early Fordsons

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums

Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga ... [Read Article]

Latest Ad: Looking for 730 fuel,tank hood, carb, intake and other associated pipes, and entire dash pedestal with shaft and steering wheel(rebuildable carb) [More Ads]

Copyright © 1997-2022 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy