Hi you keepers of Fordson knowledge.
Being my first post here, I thought...Why not make it serious. So, refurbishing my Power Major I finally came to the hydraulic system. Started with the top part, namely valves, cylinder, piston "and stuff". I got the piston out, and after that I shined a light into the cylinder...And suddenly remembered the words.."Houston, we have a problem.."
The cylinder is cracked (see picture). This cylinder is a simple one, without valves and extra "whistles" on it.
1: Is this cylinder possible to buy as a spare part? (Googled a little, could not find that type.. )
2: if real lift is not going to be used (mounted a backhoe), can I simply "block / plug" outlet and return on the "valvepart"?
Any help hugely appreciated
Sincerely Roger
Being my first post here, I thought...Why not make it serious. So, refurbishing my Power Major I finally came to the hydraulic system. Started with the top part, namely valves, cylinder, piston "and stuff". I got the piston out, and after that I shined a light into the cylinder...And suddenly remembered the words.."Houston, we have a problem.."
The cylinder is cracked (see picture). This cylinder is a simple one, without valves and extra "whistles" on it.
1: Is this cylinder possible to buy as a spare part? (Googled a little, could not find that type.. )
2: if real lift is not going to be used (mounted a backhoe), can I simply "block / plug" outlet and return on the "valvepart"?
Any help hugely appreciated
Sincerely Roger
