Ford 4100 - Just Delivered !

rroodd

New User
hi All, from Down Under ! Just taken possession of my first little Ford - have been looking for a 4000 for a while and then this one popped up, so very happy.
From the nameplate numbers - am i correct in saying she's a 1979 model, made in England.?
Is this ROPs/ Roof frame a genuine original Ford fitment ? Seems to have Ford stickers on it.

Starts and seems to run fine, gears a bit notchy but then I always remember my fathers's 4000 was the same. Can't wait to tidy her up a little bit, and put her to use on my little hobby farm !

Anything I need to watch out for maintenance wise on these?
Cheers and thanks for your help !
Rod

mvphoto101243.jpg




mvphoto101244.jpg




mvphoto101245.jpg




mvphoto101246.jpg





mvphoto101247.jpg



mvphoto101248.jpg



mvphoto101249.jpg



mvphoto101254.jpg



This post was edited by rroodd on 01/08/2023 at 05:33 pm.
 

Your tractor was built May 16, 1979 on day shift in Basildon England

4100 was a combination of 4600 axle, transmission and hydraulics, front axle and steering are like used on 3600 series
Engine is a 183 ci 3 liter, it has the longer 4.4" stroke of the 4600 s 201 engine but has the smaller 4.2" bore used in the 3600 s 175 engine
Good engine with good torque, hp is more than the 3600 and less than the 4600
My info shows 52 gross hp and 45 pto hp
 
It appears to have high crop front wheel spindles.
The 4100 I owned had 24 inch turf tires and it sat pretty level.

This post was edited by Tom in Mo. on 01/09/2023 at 04:12 am.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top