steve in ok
Member
- Location
- central Oklahoma
I think I got my control figured out and it is back on. When I start the tractor and the cylinder ends are unhooked at the front tie rod the cylinders don't move until I am at the stops both ways. They move the correct directions just no movement until it is at full left or full right. Do I have my control valve adjusted to loose or to tight? Or, something else entirely. The shop manual troubleshooting does not really discuss the problem I am having. Thanks
This post was edited by steve in ok on 05/22/2022 at 06:46 am.
This post was edited by steve in ok on 05/22/2022 at 06:46 am.
