Ford 3000 Shifter issue

ShadyRun

New User
Hello, this Forum has been extremely helpful, thanks to
all that have helped. My Ford 3000 keeps getting hung
up in gear at the inconvenienced time. I bought a new
shifter off of this site. Worked for a day or two, happened
again. Could not get the new one to fit exactly right, so I
put the old back on. It worked for several weeks and the
popped out again yesterday. The end of the shifter
doesnt really look anymore worn than the new? Any idea
what might be going on? 8 speed manual on mine
Thanks, Don
 
guessing here, but either the shifter end is worn, or the ball socket that the shifter sits in,,, is worn letting the shift raise up a bit. Try to shift in a square pattern to help keep from locking the trans up.
 
also could be detent balls and springs are broken down and no longer keeping the shift forks in place... check those as I had two springs collapse on my 3000.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top