solenoid for 12V conversion 641

Mtchbrian · Mar 29, 2022

This message is a reply to an archived post by Texas on April 30, 2014 at 15:13:29.
The original subject was Re: solenoid for 12V conversion 641.

What is the proper wiring hook up for this solenoid? I'm replacing the solenoid on my 63 ford 2000(appears to be identical mechanically to my 641. Wanting to get this right the first time.

Sean in PA · Mar 29, 2022

If the original solenoid is still working on 6 volts it should work fine with 12 volts.

Mtchbrian · Mar 30, 2022

(quoted from post at 20:24:03 03/29/22) If the original solenoid is still working on 6 volts it should work fine with 12 volts.

The previous owners had a jacked up none factory solenoid on it. It was worn out and had to be jumped with a screwdriver in order to start the tractor. I'm trying to put it back to factory specs so I can start with the button instead of a screwdriver. I ordered the NAPA ST542 solenoid based on my research on here.

JMOR · Mar 30, 2022

(quoted from post at 16:27:38 03/30/22)

(quoted from post at 20:24:03 03/29/22) If the original solenoid is still working on 6 volts it should work fine with 12 volts.

Click to expand...

The previous owners had a jacked up none factory solenoid on it. It was worn out and had to be jumped with a screwdriver in order to start the tractor. I'm trying to put it back to factory specs so I can start with the button instead of a screwdriver. I ordered the NAPA ST542 solenoid based on my research on here.

hat is a good number.

solenoid for 12V conversion 641

Mtchbrian

New User

Sean in PA

Well-known Member

Mtchbrian

New User

JMOR

Well-known Member

Similar threads