Ford 4000 4 cyl gas, engine part I don't recognize foun

Andy kle

New User
valve train and pan off because cam and crank gears destroyed each other, when I rolled it over a "cap" looking thing fell from I don't know where. I've temporarily misplaced my manual. it is 15/32" wide, 9/32" tall and 3/16" deep. it sits on I don't know what, and has a wear mark on it like it rotates with something riding on it. This is not my only problem, I've misplaced the proof meter drive on my hydraulic pump too. All this was last summer so it's sat awhile. Any help would be hugely appreciated. Now to search out my manual! Thanks all! Andy k
 
The tach drive is probably 3 feet to the right and 4 feet rearward from the right rear wheel.That's where I found the last one I was looking for.
 
(quoted from post at 18:05:34 03/14/22) valve train and pan off because cam and crank gears destroyed each other, when I rolled it over a "cap" looking thing fell from I don't know where. I've temporarily misplaced my manual. it is 15/32" wide, 9/32" tall and 3/16" deep. it sits on I don't know what, and has a wear mark on it like it rotates with something riding on it. This is not my only problem, I've misplaced the proof meter drive on my hydraulic pump too. All this was last summer so it's sat awhile. Any help would be hugely appreciated. Now to search out my manual! Thanks all! Andy k

UPDATE: I found my manual, and now I know what I dropped was an exhaust valve rotator. and next to where it goes is another on missing, 1/2 hour hunched over searching the floor/ground-nothing--arggghhh! Thanks Sean!
 
I have a 4 cyl. Gasser camshaft and gears pictured if interested.
My email is open
mvphoto89298.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top