Ford 2810 3pt Hitch Lift Issue

Jwynnejr1

New User
I've got a problem that has me scratching my head. I've got a Ford 2810 with a 700 series front end loader. In the fall when I was tilling a food plot and out of the blue, the 3pt
hitch stopped lifting the tiller. At first, it would try to lift it back up and give up about an inch off the ground. I've checked the hydro fluid level and changed the hydraulic
fluid filter. Front end loader still works fine. Lift has been attempted with flow control valve in all positions. I can stand on the three point hitch and it would lift me fine.
Now it will not even do that.
Can someone please give me some direction?

Thanks.
 
(quoted from post at 14:47:56 03/10/22) I've got a problem that has me scratching my head. I've got a Ford 2810 with a 700 series front end loader. In the fall when I was tilling a food plot and out of the blue, the 3pt
hitch stopped lifting the tiller. At first, it would try to lift it back up and give up about an inch off the ground. I've checked the hydro fluid level and changed the hydraulic
fluid filter. Front end loader still works fine. Lift has been attempted with flow control valve in all positions. I can stand on the three point hitch and it would lift me fine.
Now it will not even do that.
Can someone please give me some direction?

Thanks.

It sounds like the lift cylinder seals may have failed and you can't generate any lift force on the 3 point. Do you have a service manual? You might want to get one and see ho the system works. The original Ford factory manuals are what you want to get.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top