Help, Stuck remote hydraulic Ford 641 workmaster

hendrixbiz · Sep 1, 2021

I am new to this but think I have a remote hydraulic on my For 641 workmaster.

The lever moves but not enough to budge the shaft. I am afraid to bend it. There are several bolts and adjustments to make but I dont know where to start. Any tips would be swell.

I have a you tube video of the issue. just search you tube for the title of this post Help, Stuck remote hydraulic Ford 641 workmaster

thank you,

troy

Sixty7camaro · Sep 1, 2021

Watching the video, it looks like the spool is stuck in the valve body. Only remedy is to disassemble, inspect and clean. Tight tolerances in this area and sometimes scoring will occur due to dirt in the oil. You'll know exactly what is going on once you take it apart.

hendrixbiz · Sep 2, 2021

Ok thanks - I wish there were more resources online for it / diagrams or instructions. Sounds like a challenge.

Hobo,NC · Sep 2, 2021

I have the same one in a pan laying in my storage building same issue it was stuck. It was on a parts tractor I had to take it apart to unstick it. There is not much to it all you will need is common O-rings. I have never took the time to clean it up and put it back together.

hendrixbiz · Sep 2, 2021

Thanks for your reply.
Common O-rings? do you think I could use a Kit from a Hydraulic 'O' Ring Kit Ford 3000?

Hobo,NC · Sep 2, 2021

Its very possible the same o-rings.

Help, Stuck remote hydraulic Ford 641 workmaster

hendrixbiz

New User

Sixty7camaro

Member

hendrixbiz

New User

Hobo,NC

Well-known Member

hendrixbiz

New User

Hobo,NC

Well-known Member

Similar threads