Ford 861, help with 3-point not rising enough

Ken Sikora · Aug 20, 2021

Ford 861 3-point not rising much

shaun wallace · Aug 20, 2021

Cam follower pin worn off. Have to pull lift cover to fix.

RDobbs · Aug 21, 2021

I have a 600 and about 20 yrs ago it started
doing the same as your tractor. Turned out to
be the cam pin and air getting into the hyd
pump.

Hdonly · Aug 21, 2021

(quoted from post at 10:53:02 08/20/21) Ford 861 3-point not rising much

My 651 does the same thing. If I pull the control handle all the way up, then push down on the position/graft handle, the lift will raise all the way up. Cam follower pin is worn. I will probably operate mine this way until I can't.

This post was edited by Hdonly on 08/21/2021 at 06:27 pm.

Ford 861, help with 3-point not rising enough

Ken Sikora

Member

shaun wallace

Well-known Member

RDobbs

Member

Hdonly

Member

Similar threads