4200 steering motor upper seals - part II

Ultradog MN

Well-known Member
Location
Twin Cities
Success!!
If you need a set, go to Napa and get a kit
for a 1968 Camaro. Part # 7-367.
$11.49 + tax
Napa kit comes with a couple of extra
orings, etc that you don't need but has
both the main double lip seal and the dust
seal.
I read somewhere - I think on the CNH parts
listing before they deleted a bunch of
stuff - that these steering motors were
built by Saginaw - as were the PS steering
boxes for the Camero.
Found a guy in Valencia CA that rebuilds
all kinds of PS steering boxes who was kind
enough to measure some seals and cross them
over to what application they were for.
I made a good fitting seal driver and
tapped it in. Have been running it at high
idle about a half hour now, turning the
wheel back and forth, adding oil as needed.
No leaks.
Yet...
Wish I could have gotten some frequent
flyer miles. Been around the
net/country/phones quite a bit on this.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top