There's been some discussion and seemingly some disagreement on the specific seals used in the X60/X61 transmission and PTO input shafts. I have a split coming up and bit the bullet and went to CHN and bought the seals from their parts desk.
Transmission input shaft seal =
CHN part # D6NN7A283A =
common seal ID = SKF 10515
PTO input shaft seal =
CHN part # 8N4233A =
common seal ID = CR-19831
Total cost from CHN for these two seals = $36.65
Searching the internet finds the same seals available for half price or less. Any industrial supplier and many auto parts stores could get these at CHN price or less and may save two long road trips which is often the most expensive and time consuming part. I've got over 100 miles wrapped up in acquiring these two seals from CHN. Fortunately I had other business which took me to the area for the first trip, but they did not have either of these seals in stock so a special trip was necessary to pick them up.
Hope this helps someone.
David
Transmission input shaft seal =
CHN part # D6NN7A283A =
common seal ID = SKF 10515
PTO input shaft seal =
CHN part # 8N4233A =
common seal ID = CR-19831
Total cost from CHN for these two seals = $36.65
Searching the internet finds the same seals available for half price or less. Any industrial supplier and many auto parts stores could get these at CHN price or less and may save two long road trips which is often the most expensive and time consuming part. I've got over 100 miles wrapped up in acquiring these two seals from CHN. Fortunately I had other business which took me to the area for the first trip, but they did not have either of these seals in stock so a special trip was necessary to pick them up.
Hope this helps someone.
David