1841-D Elenco and 712 loader

warbaby

Well-known Member
I just posted a photo ad for this non-running 1841 tractor I am parting out. Lotsa good parts and even a few bad ones!
cvphoto65139.jpg
 
(quoted from post at 23:32:15 11/30/20) I wondered how long it would take Royse to see the ad lol. His 1841 is just begging for that Elenco front end.
I have to agree MichFord! LOL

mvphoto65971.jpg


I did get the rear tires and rims back on that came with it and a set
of fenders. The other set wasn't loaded and it didn't like to move well.

mvphoto65972.jpg
 
Correct. They are 16.9x24's. They weigh a ton!
Ok, maybe not quite a ton, but they are the first set that I actually
got out the cherry picker to put them back on after taking them off
by hand. I'd like to think I'm getting smarter, but truth be told, I'm
probably just getting older. LOL
 
I moved this fully loaded 16.9 X 28 a couple times be hand. After coming close to dropping it I finally got the forklift to do the job.

<a href="https://imgur.com/aUcwVOH">
aUcwVOHl.jpg" title="source: imgur.com"
</a>
 

Do you have this pipe?

comes out of the top of hydraulic filter unit, 90 degree elbow fitting to the operator control valves on a 4140 with a 712 loader, not sure if it is the same.

mvphoto66137.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top