riveroadrat
Well-known Member
I looked through some old posts on this but the only pic I saw was for an 8n type box. the manual says to put the left sector block cog at the top. the 8n pic I saw in the post had the large blocking cog at the top and the small one at the bottom. My smaller block cog was on top and the large one on the bottom when I removed them and this tractor was in use for a long time, no problems. The manual says to put the blocking cog at the top but doesn't specify small or large. I think the small one is the blocking tooth. I haven't installed the box yet. What say you?