Spring line uo

Finally have them all running. Including newly acquired 61 851... that desperately needs a rear main seal.
mvphoto54746.jpg
 
Thanks. It s a workhorse. Don t use it much but when you need it, it s indispensable. 1966 4500. Got it from my dad who bought it in 1981.
 
(quoted from post at 03:50:15 05/14/20)

Nice looking gathering. It looks like someone used X000 white on the one next to the 4500.

That s the 851 I recently picked up. Sheet metal is rough and poorly painted, with a leaky rear main seal, but nice solid tractor with new back tires and new bumper, gauges, steering wheel etc for $500... and was like 5 miles from home.
 
(quoted from post at 04:07:20 05/14/20)
(quoted from post at 03:50:15 05/14/20)

Nice looking gathering. It looks like someone used X000 white on the one next to the 4500.

That s the 851 I recently picked up. Sheet metal is rough and poorly painted, with a leaky rear main seal, but nice solid tractor with new back tires and new bumper, gauges, steering wheel etc for $500... and was like 5 miles from home.


Campground man, I put a bid of $800 on one three years ago that had No sheetmetal, junk tires, a half there loader, no lift arms, and a spin on oil filter that had a leak rusted through the side. It started and ran however. Oh, and it had 2/3 of an Elenco. I know the guy that bought it for $1300.00
 
(quoted from post at 14:49:50 05/14/20)
(quoted from post at 04:07:20 05/14/20)
(quoted from post at 03:50:15 05/14/20)

Nice looking gathering. It looks like someone used X000 white on the one next to the 4500.

That s the 851 I recently picked up. Sheet metal is rough and poorly painted, with a leaky rear main seal, but nice solid tractor with new back tires and new bumper, gauges, steering wheel etc for $500... and was like 5 miles from home.


Campground man, I put a bid of $800 on one three years ago that had No sheetmetal, junk tires, a half there loader, no lift arms, and a spin on oil filter that had a leak rusted through the side. It started and ran however. Oh, and it had 2/3 of an Elenco. I know the guy that bought it for $1300.00

Value is so fickle. I wasn t looking for another one but it was too good a deal to turn down. He was asking like 800, I just offered him 500 and he wanted it gone. I have a very nice Ford loader that came off one of my 841 s and I really didn t want to put it one either of the 841 because of how I use them. This will be perfect as a loader tractor after a decent amount of work... split, clutch, king pin, engine rebuild, paint. And either used power steering or Jackson power steering... not sure which.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top