Wagner WF3 tilt cylinder

MeanGene1

Member
Have a step-through WF3 on my 850, always liked these, my gramps 8N that I plowed snow and loaded coal with as a kid had one. Everything works great except the bucket tilt cylinder leaks pretty bad, and the rod is chewed up a bit at the end, I would guess someone ran a chain around it to pick something up. Hate to spend the time and money to rebuild it trying to dress the rod up and have it still leak. What have folks used as a replacement? Quick search found this one at TSC 10 min away, seems pretty close, original is about 26-1/2" to pin centers. What is the cylinder ID of the original? I do have the same cylinder on a Wagner-International 260, but unknown condition and hate to scrounge off that one
https://www.external_link.com/tsc/product/countyline-tie-rod-cylinder-25-in-bore-x-24-in-stroke-1125-in-rod-dia?bvstate=pg:2/ct:r
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top