So the 7600, when brush hogging starts out
fine then the pto looses power they say.
Was told it could be worn pump or oring I
took some pressure readings.I got
Normal 120-140 gauge flutters
Power, click it in drops then settles
about 145
With PTO on I get
Normal 60 psi
Power drops then 180-200.
I dont know much about these hydraulics.
Where should I look now?
Thanks,
fine then the pto looses power they say.
Was told it could be worn pump or oring I
took some pressure readings.I got
Normal 120-140 gauge flutters
Power, click it in drops then settles
about 145
With PTO on I get
Normal 60 psi
Power drops then 180-200.
I dont know much about these hydraulics.
Where should I look now?
Thanks,