Threewilsons
Member
It takes a 1-5/16 inch socket to fit these large lug nuts on the rear of my 4140. They also have a "snout" or shoulder about 1-1/8 inch diameter that fits through the thick wheel center. You can see in the pic that I need one - just one. The thread is the normal 5/8 inch fine thread.
I know that just about everything else in the world is more important than this but maybe someone has one. I did try Messicks but no luck.
Thanks,
-Joel
I know that just about everything else in the world is more important than this but maybe someone has one. I did try Messicks but no luck.
Thanks,
-Joel