860 Power Steering Fluid

Del Huebner · Sep 29, 2019

I have water in the fluid in my power steering reservoir. Can someone tell me how to drain the entire system so I can replace the fluid?

fredstev · Sep 29, 2019

You can make a real job out of it trying to drain every component, then repriming them all, but what I did was use a turkey baster, empty the reservoir and fill with the proper mc241w oil. Used it for a few days and repeated. Put a new filter in when you're done.

Dean · Sep 29, 2019

I jack up the front axle and remove the hoses at the cylinders after using a suction gun to remove the oil from the reservoir and before turning the steering fully side to side a couple of times. Then reconnect hoses, fill reservoir, start engine, turn side to side a time or two, replenish oil in reservoir.

Repeat until all is clean.

Dean

860 Power Steering Fluid

Del Huebner

Member

fredstev

Member

Dean

Well-known Member

Similar threads