|
| |
| Ford Tractors Discussion Forum |
Re: Need Ford Rim Clamps
[Show Entire Topic]
| Author |
[Modern View] |
|
Royse
09-17-2019 18:42:46
|
"And if that special bolt is still available From NH they will terribly expensive."
All of my bolts that weren't rusted in, were loosely captive in the wheel centers.
They wobbled, but had to be driven out. How do you replicate that?
Fine thread carriage bolts are readily available, even in grade 8.
Probably not at a big box store, but my local hardware carries them and
I've found them at multiple places online like McMaster-Carr and Grainger
The rim clamps themselves took me a while to find.
Then I bought some used tractors that had junk rims on them.
I might have some spares laying around but I would need to go hunt them down.
|
|
|
|
|
Lingcod
09-18-2019 12:49:04
|
|
Re: Need Ford Rim Clamps in reply to Royse, 09-17-2019 18:42:46
|
|
| |
If you would happen to have or find one of the stop clamps with the little "finger" on it, I would be interested in buying it. I will likely just buy a couple of the fine threaded carriage bolts but would be intersted in 3 of the original bolts with nuts if you had any of those. Thanks.
|
|
| [Show Entire Topic]
[Options]
[Printer Friendly]
[Posting Help]
[Return to Forum]
[Log in to Reply]
| Fast Shipping! Most of our stocked parts ship within 24 hours (M-Th). We have the parts you need to repair your tractor - the right parts. Our fast shipping, low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ] |
Home
| Forums
Copyright © 1997-2019 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
|
