How to bleed a 3600 hydraulic pump?

Split the tractor to change the trans seals. Put the tractor together. Added 5 gallons new hydraulic fluid. The lift doesn t work at all. I assume the pump needs bleeding. How to?
 
No need to bleed a gear pump.
Just run it a bit and it will self
prime.
That is of course IF you don't have an
air leak on the suction side.
 
Split the tractor to change the trans seals. Put the tractor together. Added 5 gallons new hydraulic fluid. The lift doesn t work at all.

Where did you add the 5 gallons of fluid? On that model tractor the hydraulics sump is the rear axle center housing which is a separate sump from the transmission.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top