Hi all. I've been looking for a site like this for a while. I'm brand new , just registered, and I have a problem for the wise minds here. I have a Ford 600 that won't start. It had been sitting for a few years, and I decided to get her running again. I started by cleaning the fuel system, next I gave it a new cap, rotor, points, and coil. I can get it to turn over but not start. There is power to the coil and I get a good spark at the points, but not at the plugs. I checked the rotor to cap contact and it seems to be good( there is a little springiness when I push the cap down on the rotor). All seems right, there is just no spark at the plugs. I'm not sure what I'm missing here. All advice is welcome, and sorry for the lengthy first post. Thanks in advance for any help.