Ford 800

steve19438 · Mar 7, 2019

I was taking to a young fella yesterday who is in the process of re-doing a 800. he said he needs studs that are course thread on one end and fine thread on the other. I believe he said they are for the front axle. anyway he is finding it a hard time locate any so I said I would mention it here.

sorry about the slim info but this is what he told me.

any thoughts or ideas ?

thanks

Kirk-NJ · Mar 7, 2019

Keller Bros didn't have them? Tell him to try smith tractor in Washington NJ. No part number in the book just sez stud 5/8-11-18 x 2 1/16

steve19438 · Mar 7, 2019

I gave him the number for kellers.

I will pass on your info.

thanks.

rockman5159 · Mar 7, 2019

Depending on the diameter and length of the studs,they are readily available at your local NAPA auto parts store. Normally the carburetor studs are course on one end and fine on the other end.

Ford 800

steve19438

Well-known Member

Kirk-NJ

Well-known Member

steve19438

Well-known Member

rockman5159

Member

Similar threads