951 headlight question

Rowdy51

New User
Hello, I am new to the forum. I am fixing up my 951 powermaster and I want to put my 19-209 loader on. I removed the left headlight and was wondering if there is a bracket of place to bolt it on the loader. Thanks.
 
mvphoto32414.jpg


mvphoto32415.jpg
 
I have no clue why the picture is upside down. I also have a 19-84 rear scoop. I have to find decals for the loader and scoop but have never really seen what the decals look like.
 
My cousin had a Ford tractor dealership in the 60s and my great grandfather, grandfather and other relatives bought about all tractors and implements from him. I have been trying to locate all of the stuff we had. I have the 860 801 and 951. Two relatives have a 901 tricycle front and a 900 series diesel. I have the loader rear scoop disc and boom pole, but I wish my cousin would have kept his 611 combine but he said it would not thrash rice so he traded to deere for a 95r. He did however give me the owners manual for it so that's pretty cool in itself.
 
Nice looking tractor. You could rig up something with some light weight pipe to put both headlights up above the grill without damaging any of the original sheet metal. Put an elbow right at each of the original headlight holes pointing up, and then another pair of elbows above those pointing in, and connect the headlights so they're above the outer edges of the hood.

Two relatives have a 901 tricycle front and a 900 series diesel.

No such thing as a 900 series diesel. They didn't offer diesels until the '01 series.
 
Nice looking tractor! How about bolting a wide angle iron to the 2 unused bolt holes in front of the grill just above the wide front & mounting lights there?
 
(quoted from post at 09:33:37 03/06/19) Nice looking tractor! How about bolting a wide angle iron to the 2 unused bolt holes in front of the grill just above the wide front & mounting lights there?

I would think that the loader bucket would block most of the light if they were mounted down there unless the bucket was raised.
 
on my rowcrops with 1-arm loaders, I put 1 lamp on the loader upright frame itself.

You can also do frog/crab eyes at the front/top of the hood. If you have a bumper that is tall, that is another location.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top