78 3600 diesel
Previous post was complaint that three point would only work within the top few inches of travel. Recommendations from members was to confirm adjustments within the top cover. Top cover is off, made a small adjustment to the draft and position control linkage per Para 260 in FO-41. Tried to confirm settings on flow control valve and cam follower and have hit a snag. Both E clips on Connector Link not installed (missing) and unable to turn knurled knob on flow control valve either direction. Not sure how to address this. I have more E clips but that's not the main concern.
Previous post was complaint that three point would only work within the top few inches of travel. Recommendations from members was to confirm adjustments within the top cover. Top cover is off, made a small adjustment to the draft and position control linkage per Para 260 in FO-41. Tried to confirm settings on flow control valve and cam follower and have hit a snag. Both E clips on Connector Link not installed (missing) and unable to turn knurled knob on flow control valve either direction. Not sure how to address this. I have more E clips but that's not the main concern.