641 snow blower compatibility

jr1983 · Jan 26, 2019

Is reverse on a 641 slow enough to run a
snow blower?

Uniballer · Jan 26, 2019

I would say this is probably not going to work.

I found an 860 to be a little too fast (and the 5-speed reverse is a bit slower than the 4-speed), but at least I had the live PTO on that model so I could stop with the PTO running to clear the blower when it got too full.

Larry NCKS · Jan 26, 2019

Combination fast reverse and non-live PTO . . . it wouldn't be anything I'd want to handle more than 2 or 3 inches of powder snow with.

JK-NY · Jan 27, 2019

No and no live pto is another issue.

jr1983 · Jan 28, 2019

Ok I'll have to go another route. Thanks for the input.

Cliff(VA) · Jan 31, 2019

You might want to consider a pull behind. There are apparently some that work good with the N's. See link below.

Cliff(VA) now (NC)
N Board discussion on this subject

641 snow blower compatibility

jr1983

Member

Uniballer

Member

Larry NCKS

Well-known Member

JK-NY

Well-known Member

jr1983

Member

Cliff(VA)

Member

Similar threads