scoutfisher
Member
Need to verify a few things before I start this job. Attached is a list of parts included with the kit. It specifically lists unfinished bushings. From what I've learned they need to be reamed after inserting to finished size.
This leads me to my question? If the pin is 1.13" what size reamer do i need to obtain? I do not own any so need to purchase one for the job.
From the information I have obtained the bushing needs to be taken down until the pins just slides in with a little effort.? Is that correct?
Can I do this with some type of brake home?
Or should I just pay to have it machined?
Thanks Jeff
This leads me to my question? If the pin is 1.13" what size reamer do i need to obtain? I do not own any so need to purchase one for the job.
From the information I have obtained the bushing needs to be taken down until the pins just slides in with a little effort.? Is that correct?
Can I do this with some type of brake home?
Or should I just pay to have it machined?
Thanks Jeff