My carburetor started flowing fuel out when I turned it off, so I bought a carb kit from here and proceeded to see what was wrong.
I checked the float, it doesn't appear to have a leak (no fluid sloshing, does float) but it still sticks open. When i replaced the pin in the picture, that pin has a rubber thing on the end and now that seems to want to stick in the "up" position and not allow any fuel.
Any ideas on what to do next?
I checked the float, it doesn't appear to have a leak (no fluid sloshing, does float) but it still sticks open. When i replaced the pin in the picture, that pin has a rubber thing on the end and now that seems to want to stick in the "up" position and not allow any fuel.
Any ideas on what to do next?