(800) 853-2651
SHOP NOW

Ford 9600 finally roars to life

J

Jo-ker

Member
I bought this 9600 at an auction a month ago. It had no batteries so it was not started up.Seemed to be in fair shape so bid on it and it was mine. well today after some coxing my 9600 started up. Power steering works
good, pto starts and stops,and dual power works too.A couple of things i noticed upon start up.Its not runnin smoothly so im thinkin its runnin on 5 cylinders.I
think the injector closest to the fan is not workin.I will look into it in the coming days.The other issue is, i hear some clattering comin from the top of the
valve cover. its not knocking, but making this clanging/pinging noises. Im thinkin valve clearances have to be adjusted. Also thinkin the fuel injector pump needs a
rebuild. Have you guys ever had these symtoms in your tractor.Any thoughts, ideas, and help appreciated......John
 
(quoted from post at 19:04:17 04/18/18) I bought this 9600 at an auction a month ago. It had no batteries so it was not started up.Seemed to be in fair shape so bid on it and it was mine. well today after some coxing my 9600 started up. Power steering works
good, pto starts and stops,and dual power works too.A couple of things i noticed upon start up.Its not runnin smoothly so im thinkin its runnin on 5 cylinders.I
think the injector closest to the fan is not workin.I will look into it in the coming days.The other issue is, i hear some clattering comin from the top of the
valve cover. its not knocking, but making this clanging/pinging noises. Im thinkin valve clearances have to be adjusted. Also thinkin the fuel injector pump needs a
rebuild. Have you guys ever had these symtoms in your tractor.Any thoughts, ideas, and help appreciated......John
Click to expand...

Did you check inside the cover of the injection pump before starting it?
 
I had the problem with the simms pump on my 6610, had rust in the pump and broken return springs.
 
I couldnt drain it. The previous owner must have lost the drain bolt and then stuck a brass radiator drain tap into the hole. I cant wrench it out, its too warn
out.
 
You must log in or register to reply here.
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top