I pulled a 175 diesel put of a 3600 Ford. Stripped down to a
bare block so it can be bored and etc. This engine I was told
by the owner had never been taken apart before but I found
all of the main bearing were .010 undersize.
Could this been like this from the factory? Or maybe the
engine was opened up a long time ago.
Anybody have a similar experience with a 175?
bare block so it can be bored and etc. This engine I was told
by the owner had never been taken apart before but I found
all of the main bearing were .010 undersize.
Could this been like this from the factory? Or maybe the
engine was opened up a long time ago.
Anybody have a similar experience with a 175?