Ford 4000 fuel tank problem please help !!

Jaston

New User
Hi all I have a Ford 4000 utility tractor , by the serial Numbers stamped on the side , the tractor is a 1965 or later 3 cylinder diesel , 8 speed . 450rpm PTO , but what is throwing us out is there is a number 1414 above the serial number that no one can seem to find out what it is and they seem to think this is the key to obtaining the right size tank , the tank they sent me had the filler cap 2 inches forward from where it should be , if anyone can help it would be much appreciated..... these are the numbers by serial number the last one is serial number I believe

D1414C
2M05B
C365852

thanks jason

trying to edit or add photos seems to be impossible on here forum????
 

D1414C is the model number but your numbers appear to be off.
D= 4000 model
14= not in my book, should be (10= Ag all purpose, 11= LCG, 12= Highway, 13= Rice, 20= Row Crop, 30=Vineyard, 31= Narrow, 40= Utility, 50= Industrial)
1= Diesel
4=Independent 540 pto
C= 8 speed trans

2M05B is production date of 12/05/72 B shift

Serial # C365852 is correct for a late 72 to early 73 model.

If yours is a utility model like my 4000SU it uses the smaller fuel tank for a 3000.
 
D1414 is the model number for a diesel 4000 SU.
2M05B is the unit number for a build date of December 2, 1972, 2nd shift.
C365852 is the serial number for a late 1972 U.S. built tractor.
My guess is that you got a tank for a regular 4000, not an SU. There's also the possibility that your tractor was put together with
parts from two or more tractors, so the stamped numbers may no longer be accurate.
 

Good to know, I've never looked at the model number on my 4000SU because I knew what it was, my service manuals are early editions and don't show the SU.

When I got my 4000SU it had burnt the from the steering wheel forward and I had to replace the fuel tank, this is why I know it takes a 3000 fuel tank that is smaller than the standard 4000 tank.
 
If my deciphering of the parts site is correct, the 4000 SU should use the same tank as the 2000 & 3000, while the regular 4000 and 4400 use a different tank. The original part number for your tank was C5NN9002H, which has been superseded by part number E3NN9002AB.
 

Thanks all for taking time out to reply , I think after reading all your replies it has to be a special utility model that takes the smaller 2000/3000 tank I'll get them to check the size of my tank against the tank with that part number when I call them that should give me a definite answer ....

Thank again all much appreciated
 

Thanks all for taking time out to reply , I think after reading all your replies it has to be a special utility model that takes the smaller 2000/3000 tank I'll get them to check the size of my tank against the tank with that part number when I call them that should give me a definite answer ....

Thank again all much appreciated
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top