Brian Allen
Well-known Member
I checked at the machine shop today, the spindle was slightly bent.
He is cutting the spindle housing down and making a bit wider section and welding it in, then line boring to bring it back to spec.
The new stock bushings and spindle will fit right in, without having to custom make parts down the road.
Should be ready to get stuck by Saturday!
Brian
He is cutting the spindle housing down and making a bit wider section and welding it in, then line boring to bring it back to spec.
The new stock bushings and spindle will fit right in, without having to custom make parts down the road.
Should be ready to get stuck by Saturday!
Brian