3000 Clutch Disk Differences

Bradley P · May 26, 2011

Hi,
I am looking into gathering up the parts for a clutch job on my Ford 3000 diesel with dual clutch with an 8 speed. It was built in November of 1974. There are several different styles of clutch disks used through out the years? Are they all interchangeable? They all appear to be 11" in diameter and have a 1", 10 spline hub. Will any work? Specifically, will a E5NN7550BA work?

Thank you

Bradley P · May 27, 2011

Wow, no input? No clutch jobs being done?

Rod9865 · May 27, 2011

I recently did the clutch in my 3000. I just went ahead broke mine apart and ordered the parts that matched what I already had. I wanted to get my parts beforehand but with so many options on clutches and pressure plates I just waited on ordering my parts. From what I have seen and read, the hub splines can't always be right by the year or SN of the tractor. I figure exchanging parts from online seller would be a bear to return if the parts are wrong.

Hobo,NC · May 27, 2011

(quoted from post at 21:19:30 05/26/11) Hi,
I am looking into gathering up the parts for a clutch job on my Ford 3000 diesel with dual clutch with an 8 speed. It was built in November of 1974. There are several different styles of clutch disks used through out the years? Are they all interchangeable? They all appear to be 11" in diameter and have a 1", 10 spline hub. Will any work? Specifically, will a E5NN7550BA work?

Thank you

Paying to ship a clutch kit back and forth can get expensive,,,BTDT,,, wait and see whats in their...

http://ytforums.ytmag.com/viewtopic.php?t=591546

RodinNS · May 27, 2011

The only safe advice here... split it open and see what you have, then carefully go through the parts book online and match what you have by disc diameter and spline count. There are many different ones so select CAREFULLY.
Should you find the original number then you can start shopping around using that.
My own suggestion... if you want a quality reman clutch, just go to Hy-Capacity. Do keep in mind that they are sometimes as much money as NewHolland.
There are sometimes other suppliers out there that carry the original OEM Borg & Beck clutches but it's a bit of hit and miss to find them.
NewHolland stuff today is generally LUK clutches.

Rod

3000 Clutch Disk Differences

Bradley P

Member

Bradley P

Member

Rod9865

Member

Hobo,NC

Well-known Member

RodinNS

Well-known Member

Similar threads