Hello all,
I have a 1950 Ferguson to-20 with the Marvel-Schebbler carb, I rebuild it and set everything according to the owners manual, 7/8 turn for the idle jet and 1-1/4 for the main jet, the tractor would start and run for a little bit, about 30 seconds and then shut off, a few days later I tried to start it again and it would give a few puffs and then nothing, and now I can't get it to fire at all. No ot sure what is going on or what the problem would be and I would appreciate any help. I also changed the spark plugs and put new plug wires on and changed the oil, also changed oil in the air cleaner. Today when trying to start it and messing with carb I had gas pouring out of the side of the carb. And I'm not sure why I would get that.
This post was edited by Wesh1013 on 11/24/2022 at 09:27 am.
I have a 1950 Ferguson to-20 with the Marvel-Schebbler carb, I rebuild it and set everything according to the owners manual, 7/8 turn for the idle jet and 1-1/4 for the main jet, the tractor would start and run for a little bit, about 30 seconds and then shut off, a few days later I tried to start it again and it would give a few puffs and then nothing, and now I can't get it to fire at all. No ot sure what is going on or what the problem would be and I would appreciate any help. I also changed the spark plugs and put new plug wires on and changed the oil, also changed oil in the air cleaner. Today when trying to start it and messing with carb I had gas pouring out of the side of the carb. And I'm not sure why I would get that.
This post was edited by Wesh1013 on 11/24/2022 at 09:27 am.