So, I built a homemade Zane Thang using some designs on the forum. Everything seems to be constructed pretty close to the instructions. Broke a bolt off on the lift arm trying to mount the offset box, so that slowed me down some. ( FYI, that bolt is 7/16" 20 on the thread size and 1" long). Had to retread the hole after drilling out the bolt but all good now. However, I don't see any noticeable difference in the lift not drifting up or down. I was seriously bummed. I'd be curious if anyone else experienced similar results or have any ideas or suggestions. Will update with pictures tomorrow.