After several failed attempts to rebuild the carb I bought a new aftermarket carb. Finally it runs again, however it stalls when load is applied or changing gears I have
to pull the choke knob out or it will die. The old carb never done this but had black smoke all the time, guessing it was running real rich. I need to get this new carb
adjusted so It dosent die when load is applied
to pull the choke knob out or it will die. The old carb never done this but had black smoke all the time, guessing it was running real rich. I need to get this new carb
adjusted so It dosent die when load is applied