Exhaust Manifold

GitChewSum · Sep 10, 2020

Hello, I'm new to this group, so please bare with me. I have a 1948 Harry Ferguson TE20 tractor and I'm I need to replace my exhaust manifold. Prior to ordering, I wanted to be certain that I order the correct part. The one the website has some visual differences and was hoping that someone might be able to help.
I also need a new throttle linkage and only saw one "universal" option and again wanted to be certain I ordered the correct part.

Thank you!

Tom H. · Sep 10, 2020

There are some differences with the new after market ones. They do fit though. I have had to do some grinding around bolt holes because the casting
was a little fat in places and the nuts wouldn’t fit in properly. Get it to work though.

Which linkage part? And if you look at eBay you may find it under Ferguson TO20 TO30 used parts.

I have a parts manual and may be able to help locate what you need

Email is open

Tom

Tom Bowman · Sep 11, 2020

The YT website shows two different manifolds for the TE 20 - which one does your manifold look like?
The first manifold shown on the webpage is made to look like the original.
I replaced my TO 20 manifold with one from Ste*iners, like the original manifold. As Tom H. said, you may need to grind a little, but they will fit, and mine has worked fine for several years now.
Do a web search for "MFS1193", which is the Ste*iner part number. YT had been carrying the Ste*iner manifold, but I'm not certain that the one shown on the YT page is the same one.

Exhaust Manifold

GitChewSum

New User

Tom H.

Member

Tom Bowman

Member

Similar threads