I have a 7' MF sickle mower. I think it's a model 41 or 42. But the model name has worn off the ID plate.
I need to get some new hold-downs for the sickle. I found the 669439M2 part# on the AGCO website, but am having troube matching it up online.
I found this web page:
http://www.link_disallowed/acatalog/Knife_Clip.html
But I'm not sure of any of them would work.
I'm also wondering about clearance. I replaced some of the rivets with nuts and bolts designed for that purpose. They're taller than the rivets, which may cause some interference.
Speaking of clearance - How much should there be between the ledger plates and sickle sections?
My mower has somewhere between 1/16" and 1/8".
Thanks for any help you can offer.
I need to get some new hold-downs for the sickle. I found the 669439M2 part# on the AGCO website, but am having troube matching it up online.
I found this web page:
http://www.link_disallowed/acatalog/Knife_Clip.html
But I'm not sure of any of them would work.
I'm also wondering about clearance. I replaced some of the rivets with nuts and bolts designed for that purpose. They're taller than the rivets, which may cause some interference.
Speaking of clearance - How much should there be between the ledger plates and sickle sections?
My mower has somewhere between 1/16" and 1/8".
Thanks for any help you can offer.
