lift control stuck in the up position


It would help to know what model tractor Mosshopper :D

If it's TEA20 or the like and the control lever won't move much then the shaft is probably binding , this area gets no oil and rusts up a bit . An easy fix , undo the bolts holding the quadrant , oil and clean the shaft and bushing area and replace . Takes all of 20 minutes if you are fortunate .
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top