I m looking for pictures of and inlet air heater assembly on a 1958 Massey 35 with Standard 23c engine. Mainly where the fuel supply is piped from. Im interested in installing one to aid cold starting. My engine starts well with the glow plugs but any additional heat would help. Thanks
Re: Standard 23C in reply to Mr Busy, 02-01-2020 16:48:54
Here is a picture of a to 35 I got last summer as you can see the power wire is not hooked up. You turn the manual valve on the orginal switch was replaced so I went with a push button and crank with the heat on if no start repeat after start turn off valve.
Fast Shipping! Most of our stocked parts ship within 24 hours (M-Th). We have the parts you need to repair your tractor - the right parts. Our fast shipping, low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.