Ferguson to20 carson
Member
Okay just finished with my dad tonight
draining the transmission rear end oil
out of my Ferguson to20. Pretty good
looking carmmal color and found some
pieces and chunks of rust at the
bottom of the plug whole or the big
middle plug. So wanting to flush it
is diesel but how do I do it? Do I
cap the 3 drain plugs up again and put
the entire 7 gallons of diesel in it
the drain it after letting it sit for
a while? Or do I leave all 3 drain
plugs open and just keep pouring
diesel into the top of the
transmission fill plug and keep
flushing it until I think it's clean?
Any help is appreciated! 😃
draining the transmission rear end oil
out of my Ferguson to20. Pretty good
looking carmmal color and found some
pieces and chunks of rust at the
bottom of the plug whole or the big
middle plug. So wanting to flush it
is diesel but how do I do it? Do I
cap the 3 drain plugs up again and put
the entire 7 gallons of diesel in it
the drain it after letting it sit for
a while? Or do I leave all 3 drain
plugs open and just keep pouring
diesel into the top of the
transmission fill plug and keep
flushing it until I think it's clean?
Any help is appreciated! 😃