TO20 Ferguson TO-561 Rocker Pin Assembly?

ghostdncr · May 18, 2019

Mine is broken off on the right-hand side, which seems to be a somewhat common problem based on what little reference to this pin I've found online. The good news is that I've managed to get mine cleaned of rust and brush paint and removed from the tractor without damaging anything!

Does anyone know of a current source for this pin, aside waiting for a used one to show up on eBay? Item #7 in the diagram below.

Dan S (NY) · May 18, 2019

There is a new hinged pin available here on this site. It doesn't say for TO20/TO30 though. You might check the dimensions.

Dan
Top Link Pin, Hinged

Dan S (NY) · May 18, 2019

Another possibility:
Top Link Pin

Tom Bowman · May 18, 2019

I have one from Sparex, I think it's Part No. S.70.
M@dison Tractor (can't use the real name) has them. YT is also a Sparex dealer, and they can usually get Sparex parts, even if they don't show up on the website. (YT would probably be cheaper.) I don't remember where I ordered mine, but I might still have the invoice.
The ones Dan found don't have the bushing/shoulder as shown on the end of the pin, as shown in the parts diagram you posted.

ghostdncr · May 19, 2019

The ones Dan found don't have the bushing/shoulder as shown on the end of the pin, as shown in the parts diagram you posted.

I think the non-shouldered rocker pin is used in the TO30 and subsequent models, with only the T20 series using the shouldered pin. This hasn't been confirmed using the various parts books, but rather an observation noted while looking for a replacement. I found a new one in England that's being shipped here for a grand total of just over $25, and that seems like a grand deal to me.

TO20 Ferguson TO-561 Rocker Pin Assembly?

ghostdncr

Member

Dan S (NY)

Well-known Member

Dan S (NY)

Well-known Member

Tom Bowman

Member

ghostdncr

Member

Similar threads