Loader on ferguson to30

Lamina1982 · Apr 15, 2019

I know most dont seem to think much of loaders on these tractors but just looking to use for light duty and cleaning out barn. Its a pretty simple loader, trip bucket and 2 cylinders with just one hose attachment to each. I know that to use tractors hydraulics i need to chain down the lift arms, but where to attach the hoses.
Would it be to one of these plugged ports near seat
Right side

Left side

Or this bolt on right side below the running board?

Is it possible to use this on this tractor? Doesnt seem to be a spot you would attach it

The loader is in several pieces so i dont have a pic of it together. No markings or such but it was on a 8n.
Seems from looking through old loader manuals on the nsite, they attached to that hole near the footboard

Tom H. · Apr 16, 2019

It is possible to put a loader on the TO30. I?ve had two. The trip loader should be lighter and easier to steer. I just read the bottom of your post and
you are on the right track looking through the n site for a manual. My Dad had a trip loader on his 9n that worked off the three point as you described
and it was great for small jobs. I believe you are correct with the plumbing. And do a search on this site and you may find an old post with info.

Post som pics of the loader so we may help you identify it.

John Deere D · Apr 16, 2019

Bob....Owner operator MF FE 35 X....at one time had a loader:

Greg Vickers · Apr 16, 2019

Without the live PTO, you would lose your hydraulics when you stop, but I guess you would have to take her out of gear and let the clutch out again. A crank mounted pump would be nice, I think they sell them here

Loader on ferguson to30

Lamina1982

Member

Tom H.

Member

John Deere D

Well-known Member

Greg Vickers

Member

Similar threads