Firing question

Ed in Pa · Apr 27, 2014

I have a super h that has been sitting for a few years. The question is I changed every thing but points and condenser. I have spark to the points. but nothing to the plugs or wires. anybody have any ideas? thanks in advance.

cole in mo. · Apr 27, 2014

Change the condenser.

Allan in NE · Apr 27, 2014

If you have spark at the points when you break them, the problem is on the secondary.

Allan

roger hall · Apr 28, 2014

dum answer---- coil wire---rotor button---plug wires---1342 firing order-- clock-wise

Tom Fleming · Apr 28, 2014

Ed, where are you located in Pa?

Charlie M · Apr 28, 2014

I'd make sure the rotor is turning - there is a little pin that can be sheared off.

David G · Apr 28, 2014

Make sure you have spark out of the coil first.

randy hall · Apr 28, 2014

did you use your wifes fingernail emoryboard to take the oxidation off of the points?

Firing question

Ed in Pa

New User

cole in mo.

Well-known Member

Allan in NE

Well-known Member

roger hall

Member

Tom Fleming

Well-known Member

Charlie M

Well-known Member

David G

Well-known Member

randy hall

Member

Similar threads